JSY1013 ihe mmetụta oke eletrik agbakwunyere

1. Ntinye AC otu nkeji
1) Oke voltaji:0 ~ 100v, 220V, wdg (ndị ọzọ voltaji ranges nwere ike ahaziri).
2) Oke dị ugbu a:0.001 ~ 10a manganese ọla kọpa sampling kpọmkwem ụdị (ndị ọzọ ugbu a ranges nwere ike ahaziri).
3) Ugboro ugboro:45-65hz.
4) Nhazi akara:A na-anakwere mgbawa metering pụrụ iche, yana 24 bit AD ka anabatara.
5) Ikike ibu ibu:1.2 ugboro nso nso bụ adigide;Ngwa ngwa (<20ms) dị ugbu a bụ ugboro 5, voltaji bụ ugboro 1.5, na oke adịghị emebi.
6) Mgbochi ntinye:Ọwa voltaji> 1k Ω / v, ọwa ugbu a ≤ 100m Ω.

2. Nkwurịta okwu interface
1) Ụdị ihu:nye UART nkwurịta okwu interface.
2) Usoro nzikọrịta ozi:Usoro MODBUS-RTU.
3) Usoro data:Ngwanrọ nwere ike ịtọ "n, 8,1", "E, 8,1", "O, 8,1", "n, 8,2".
4) Ọnụ nzikọrịta ozi:enwere ike ịtọ ọnụego baud na 1200, 2400, 4800, 9600bps;Ọnụego baud nke interface nzikọrịta ozi bụ 9600bps na ndabara, na usoro a bụ "n, 8,1".

3. Mmepụta data nha
Voltage, ugbu a, ike, ike ihe, ugboro, ọkụ eletrik na ndị ọzọ eletrịk parameters.

4. nha nha nha
Voltaji, ugbu a na ike: ≤ 1.0%;Ọkwa kwh na-arụ ọrụ

5. Ike ọkọnọ
Mgbe dc+3.3v ike ọkọnọ, ahụkarị ike oriri: ≤ 20mA.

6. Ebe ọrụ
1) Ọnọdụ okpomọkụ na-arụ ọrụ:-20 ~ + 70 ℃;Nchekwa okpomọkụ: -40 ~ + 85 ℃.
2) iru mmiri dị ala:5 ~ 95%, enweghị condensation (na 40 ℃).
3) elu:0 ~ 3000 mita.
4) gburugburu:Ebe na-enweghị mgbawa, gas na-emebi emebi na uzuzu na-eduzi, na-enweghị nnukwu ịma jijiji, ịma jijiji na mmetụta.

7. Okpomọkụ ịkpafu
≤100ppm/℃

8. Usoro ntinye
Ntinye agbakwunyere, nwere ike inye nkwakọ ngwaahịa

9. Nha modul
23 * 23mm, pin spacing 2.54mm